Blanket Permit - Annual

DEFINITION – BLANKET PERMIT: 

A Blanket Permit is the written authorization granted by the Commissioner of Motor Vehicles for the movement of a vehicle or combination vehicle and its nondivisible load with prescribed limits of size and/or weight over State/Interstate highways.

Note:  Vehicles obtaining blanket permits for weight must be registered to the maximum limit and so configured as to legally meet the road limit in accordance with 23 VSA §1391 & §1392.

DEFINITION – NONDIVISIBLE LOADS:

Blanket Permits are issued for nondivisible loads.  For this purpose nondivisible means any load or vehicle exceeding applicable dimension or weight limits which, if separated into smaller loads or vehicles, would:

  1. Compromise the intended use of the vehicle, i.e., make it unable to perform the function for which it was intended;
  2. Destroy the value of the load or vehicle, i.e., make it unusable for its intended purpose; or
  3. Require more than eight (8) work hours to dismantle using appropriate equipment.  The applicant for a nondivisible load permit has the burden of proof as to the number of work hours required to dismantle the load.

Note:  Nondivisible does not prohibit the movement of more than one piece when the permit is issued for the largest piece and additional pieces do not cause the total load to exceed a dimension already allowed by the permitting of the original piece. For instance, a permit issued for an over width wooden truss would remain valid if a number of trusses were piled on but that action did not cause the load to exceed the width of the original truss or cause the load to be overlength, over height, or overweight. 

Related Forms & Information

Contact Us

Vermont Department of Motor Vehicles
120 State Street
Montpelier, VT 05603-0001

Monday-Friday: 7:45am-4:30pm
email telephone

Public Records

Connect with us

Twitter icon
Facebook icon
Instagram icon
YouTube icon
RSS icon